Foro de InfoSpyware - Foro de Hijackthis - Foro de Virus

El problema es que al intentar gravar un dvd con nero6 siempre me da error de escritura y se cancela la grabacion. pense que podiaser problema del programa pero he probado otros programas pero hace como que los graba pero luego el dvd se queda en como si nada.es posible que la grabadora este rota??

AQUI PEGO EL POST DE NERO:


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Archivos de programa\Ahead\Nero\Wnaspi32.dll':
Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 15:51:12
Versión de Nero: 6.6.0.1 (Nero Express)
Grabador: <HL-DT-ST DVDRAM GSA-4160B>Versión: A300 - HA 1 TA 1 -
6.6.0.1
Controlador de adaptador:<atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4160B>Versión: A300 - HA 1 TA 1 -
6.6.0.1
Controlador de adaptador:<atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST380021A atapi Port 0 ID 0
DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8161B atapi Port 1 ID 0
DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4160B atapi Port 1 ID 1
DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8161 D: CDRom0
HL-DT-ST DVDRAM GSA-4160 E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 279MB (286228kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.11.2006
Compilación ISO
22:08:15 #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

22:08:15 #2 Text 0 File Reader.cpp, Line 127
Reader running

22:08:15 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4160B running

22:08:15 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

22:08:15 #5 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

22:08:15 #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1901471 (422:32.71, 3713MB)

22:08:15 #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

22:08:16 #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

22:08:16 #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

22:08:16 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1901472 (1901472) = #1901472/422:32.72
relocatable, disc pos for caching/writing not required/ required, no
patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
1901472 blocks [HL-DT-ST DVDRAM GSA-4160B]
--------------------------------------------------------------

22:08:16 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
3894214656, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1901472 | lead-out | 1 | 0x00 | 0x41

22:08:16 #12 Phase 24 File dlgbrnst.cpp, Line 1853
Inicio del caché de archivos

22:08:16 #13 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

22:08:16 #14 Phase 25 File dlgbrnst.cpp, Line 1853
Caché de archivos terminado

22:08:16 #15 Phase 36 File dlgbrnst.cpp, Line 1853
Inicio del proceso de grabación a 4x (5.540 KB/s)

22:08:16 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
orig at #0): write at #0

22:08:16 #17 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer
Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW,
DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63:
56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

22:08:16 #18 SCSI -1065 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03997000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0xFA 0x00 0x00 0x0E 0x20 0x00

22:08:16 #19 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 11:58,807 (718807ms) -> OK

22:08:16 #20 Text 0 File DVDPlusRW.cpp, Line 632
Start write address at LBA 0
DVD high compatibility mode: Yes

22:08:44 #21 SCSI -1135 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06100000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x00 0x0E 0x0C 0x00

22:08:44 #22 CDR -1135 File Writer.cpp, Line 311
Error de escritura

22:08:44 #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

22:08:44 #24 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

22:08:44 #25 SCSI -1135 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x00 0x0E 0x0C 0x00

22:08:44 #26 Phase 127 File dlgbrnst.cpp, Line 1853
Generando bordes de alta compatibilidad de DVD

22:08:54 #27 SCSI -1135 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x00 0x0E 0x0C 0x00

22:08:54 #28 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

22:08:54 #29 SCSI -1065 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03996000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0xFA 0x00 0x00 0x0E 0x20 0x00

22:08:54 #30 CDR -1135 File WriterStatus.cpp, Line 167
Error de escritura
HL-DT-ST DVDRAM GSA-4160B\H1 T1

22:08:54 #31 TRANSFER -24 File WriterStatus.cpp, Line 167
No se ha podido realizar la finalización de Disc At Once.

22:08:54 #32 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

22:08:54 #33 Phase 38 File dlgbrnst.cpp, Line 1853
El proceso de grabación ha fallado a 4x (5.540 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158),
size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
0 (Security Option)

Hola date una vuelta por aquí Detección de fallas en unidades de CD/DVD.

Allí además hay una mensaje destinado a las LG, que es tu marca.

Saludos